Sweet Related Drawings
Showing first an output coil which is square, and an input coil
setting inside it which is cylindrical.
Ext switch, showing that after
the coil arrangement is running, the pulsing and AC power from the wall
is removed from the circuit.
The only elements running the system now, the coils, the magnets, and
the light bulb.
Output coil is wired directly back onto the input of the transformer.
Showing the use of a varac in
series with the light bulb load, and an uncompleted pulsing scheme on
Label is to condition the magnets.
Showing the addition of FB1, FB2, as a feed back loop to eliminate the
AC wall power iron core transformer.
The addition of T1, T2, to start up the system using a battery on a
The circuit between EX1 and FB1, EX2 and FB2 are the cross coupling
between the two systems of 90 degree interaction.
Note the FB1 and FB2 coils are not canceling wound.
The T1 and T2 polarities are opposing fields.
The P1 and P2 are also opposing fields.