Heal The World 363
[Public Release Document - Technical]
Arranged 3 - 1 - 2015
Modified 5 - 19 - 2015
Level One - The Local Field
Service To Self - The Personal Awakening
Heal The World 363
Nasa Photo of Earth
The Earth Outflow Wave - Level one Training
To bring awareness of the local vibration field into your personal area of the world
As Keshe described to us, the manifesting of the earths elements are done from energy that is radiant from the planetary core.
While doing vibration scans of the earths core I found this to be a
very accurate representation of how vibration also works on the planet.
The earth receives energy from the background field converging on it's
center of mass, breaks this field downwards in frequency and then sends
the lower frequencies back outwards to create and then sustain all the
elements, including the bioform layer we live inside. Level one
training is to learn to resonate with this energy and establish local
field bubbles with it for direct experiment and meditation purposes. To
become sensitive to vibration tuning, and to use it to open the human
Chakras of the vertical alignment, as well as the palms for sensing,
and the pineal area of the brain for receiving. This is a technical and
spiritual merging, where the body becomes the meter for receiving and
peaking vibrational resonance in a technical device to assist this
opening in us.
The Source Field Wave - Level Two Training
To bring awareness of how to succeed at raising the worlds consciousness for mankind as one, on a planetary scale.
The Source field originates on the outer boundary of the
universe, and permeates all space with "the field fabric" containing
all vibration forms that are possible to resonate up from the Aetheric
I have referred to this energy filled field as the Matrix, as we have
been recording wavelength for some years as to what can be vibrated up
directly from it, using SS caliper techniques.
Since the Source field moves from the outer boundary to the core of the
earth we can also intercept it and work with it in its prime form
before it hits the planetary core.
In this way, when attuned, one can learn to send vibration into the earths
core and have a field rise up to envelope the entire planet, similar to
working with crystal spheres, to clean and clear our planets layers.
This document is for level one
training. It is a prerequisite for the level two training, where one
must be sure of what they are doing before applying it to the Source
"We must all learn to walk before we can run."
Reversing Our Belief Systems
The Greatest Deception
- The Teachings which dominate our culture at this time and disconnect us from our Planetary Home
How many today are afraid to look downwards into the earths depths?
What were we taught as children? How do we treat the earth today as
I was taught that Satan is the ruler of this world, and my hope was
above this world in heaven. My focus turned upwards to the sky, to meet
the God that was the Source of all creation.
My fear of hell below, the dark entities were given possession of
these lower realms. I was taught in healing, arts at one point, to send
all the bad energy downwards into the earth, that the earth would just
take care of this for us.
It was while experimenting with large crystal spheres I realized the
fallacy of these teachings and why the Earth keeps manifesting bad
things for mankind at the surface.
The Mother, Earth herself, is the largest manifesting sphere we
have access to, from the core outwards, exactly like a quartz crystal
It is already right under our feet, the largest mass of creative vibrational energy we have access to.
What you send into it, is what it will reflect back outwards with an
amplification to the whole of the sphere, if you learn to resonate with
I have decided to stop giving a place for the Dark ones to keep their presence inside this world below me.
To "reclaim our space", to "clean and clear" it, that it begin manifesting the qualities of an advanced civilization.
Honesty - Truth - Love - Harmony - Balance
That the humans living on the surface come into a state of Integration on all the conscious levels we have access to from Mother Earth, our home.
That we reconnect with her as she actually is, in field resonance, that is accurately observed.
That we remove the presence of fear, hate, war, control over others, as dominate players in world affairs which they are today.
That we then raise the consciousness of mankind as one, and not repeat
the fall of our civilization as we have so many times before in our
history to date.
The Native American Wisdom
The loudest message I heard from the Native American Elders "The ones
who now have occupied America, will soon die off and be gone as they
came, because they do not know how to live on Mother Earth" "When they
came you could drink from every stream, you could plant in any field."
"They have not learned how to live on the Earth."
Mother Earths Consciousness is Real
Experiment with the resonant tubes and rods, has proved to me, the earth grid is very real.
At the various depths into the planet are located different levels of our consciousness as well.
These are the fields we live inside of and generally do not notice because they are so constant.
This document is intended to give some of the tools that you can also prove this to yourself.
We begin right at the surface layer with the 135 mm resonance, and then
drop down deeper to the GL fractal resonance of Joy and Love, giving
also the RA fractal of personal energy.
We show ways to tune these vibrations in using the earth grid, and how
to feel them peak in power levels with distance over an earth node
The Earth will manifest what we send into it
Once you have discovered the earth grids and begin to work with them in
full personal "awareness" the level two training is pointed at a world
wide opening towards manifesting what is sane, good, and self
sustaining for mankind as one.
The first goal however is to connect you with the Mother at the surface
and create local field bubbles around yourself and your personal space.
To "claim your local space" and send out any invaders like ghosts or
depressing presences. To learn a bit about adjusting these fields
yourself, and to master something called tuning resonance, using
your own body to locate the peak intensity of the vibration fields.
I hope you enjoy this interactive learning experiences as much as I have.
Level One Training
Starting at the Surface
This is the starting point of all
future work. Crystals, resonant tubes, many other devices, as well as
conscious work can be done after the Surface Grid becomes familiar
The Grid System of Vibration
The Surface Grid is basically square.
The blow up at the top gives a general dimension to the pattern to
expect when searching them out.
These points on the earth, were often referred to as power spots by
Shaman. They vary in strength depending on other geometric factors, but
are relatively consistent everywhere on the planet as far as I know.
The lines may bend a bit when "sensed for" and plotted for any specific location.
Because they can access any of the inner earth vibration levels, where
the lines cross at the node points, they are not good for children to
sleep over, but they are excellent for conscious vibrational work and
to amplify vibrational resonant tubes.
Meter and Ground Rods
If one uses ground rods on these points they will have a small positive charge with negative voltage all the way around the point, about 1 foot away or more.
The voltage on these nodes increases in positive charge to the West from the last one measured. A digital volt meter and two ground rods
can be used to confirm exact center of position until vibration
sensitivity is mastered. The major ones can be radiant up to a couple
A Healing Rod
One of the first personal healing applicationsis
to take a copper clad iron ground rod and pound it into a major node
outside the home, at a height you can stand by it and hold it
comfortably like a cane, without having to bend over. This can
become addictive and very nice, to go out and use for clearing
your personal energy field once a day, using the earths surface grid
The ground rod will not radiate this energy outwards at all, you will
have to touch the rod to receive the vibration from this field, the
copper surface on the rod gives a very nice access to this field for
I have used 5 foot telephone type ground rods for this, and had very
pleasing results. Be sure to mark them well that no one run into them
unexpectedly and get hurt.
Spending some quality time with this, will pay off big time with vibration sensing. This application is hard to miss.
Locating an Earth node - 135 mm resonance
While this may seem like child's play at
first and far too simple, it can also pay off big time when you begin
to actually feel and tune into the earths surface layer of vibration.
It may be the first time you realize there is a science to
vibration energy, and it also has a healing conscious aspect within it
as you feel it directly.
I can offer two very good methods I have developed over time, that have
worked well for others, to sense where these are, without using the
meter and ground rods described above.
The Pyramid Sensing Technique
A tetrahedron is made from cutting 4
triangles out of some heavy craft paper, then taped together. The sides
of the tetrahedrons are all accurately cut to 13.5 cm.
That is 135 mm. When you find an earth node, the pyramid will produce a
field that can be felt using palms to about 1 foot out off the sides
Just holding the pyramid with hands and keeping the bottom relatively
flat to the ground one can walk around with meditative mind turned on,
and feel these point,
then make judgment of which is the major node, as it will be much stronger and wider on the earth.
This is really fun group activity as well, with two or three people, and maybe one who we know is sensitive already.
The sensitive person may get a surprise!
The Two Resonant Wires Technique
Wires of soft iron [re bar tie wire] and bare copper [can be stripped off some old house wiring] are each cut to 13.5 cm.
They are then held together vertically to the ground in one of the
hands, I use my left, and then we begin walking around feeling for the
electrical shock type energy over the grid points.
This will create an electrical sensation on the hand at the palm
grasping the two wires as they touch parallel to one another, and can
cause a numbness for a time in the palm.
Electric energy is not hard to detect at all touching the hand, and
feels like a 9 volt battery on the tongue. It will seem to flow between
the iron and copper wires, so keep them both in the same hand while you
As an alternate a larger copper pipe can be cut to 135 mm and used as
well, many can feel that also as an electrical charging numbness.
A Sample Video
A Stand for Tuning Tubes to the Earth Grid
In these experiments we demonstrate how using an earth node can power up vibration on a tunned element, such as a rod or a tube.
The vibration tunned in may be any of the earth grids all the way down to the core of Mother earth.
With each layer we access one of our own conscious vibrations, that the human body is sourcing energy from.
Source energy lies below our feet.
36" High Stand Amazon
Tube Clamp Amazon
Showing a stand with two clamps available for horizontal tunning in the above photo and vertical tunning in the lower photo.
The earth node was located previously, and now the apparatus for creating fields that expand outwards and radiate into the room.
In this shot a true North degree disc is positioned to show the
directions of the earth. East West is a very strong line for vibration
work, and so is true North South [earths spin axis.]
Granted, this same technique can be used in many ways with Crystal
spheres, ordinary crystals, even Rocks. Any mass is vibrated up from
the center of balance, the center of gravity.
This is called distance tuning.
You will raise and lower the resonant tubes center position, over
the earth node until the vibration is maximum on the mass of the tube.
The GL in the lower picture can be felt to many feet out with the palms
when you get the height of the 8x tube perfectly tunned in over the
Arranging Rocks and Crystals
If you are getting familiar with the Earth Grid Nodal points, this next
step will offer a new concept for making larger fields of vibration,
using multiple numbers of objects circled around one of them.
These can be made large enough to set inside.
Distance tuning with quartz crystals, demonstrated in the photo above.
This technique goes back in time a long way. While probably developed
as a working system for vibrational portals by some with awareness,
these are still used today in ceremony, possibly with little knowledge
how truly powerful they can become if tunned in to a resonant
wavelength correctly. The crystal ball is correctly positioned over an
earth grid node point, the secondary quartz crystal to the left is
moved towards then away to locate a point where the two create a
coupled field between them. They both then vibrate up.
This particular one creates a pretty strong field in the photo
above, as an example of what arranging rocks and crystals is all about.
I tuned it for the quartz resonance, however one could also use a
different distances to bring up the GL or the RA fractals.
Placing a hand between the two reveals a line path of very intense vibration energy running between them.
A circle of rocks around a major node position can be set up to
generate a platonic form vibration at any resonant wavelength you would
choose to open a large bubble of energy around. The center rock on the
node can then be removed, and the vibration will sustain from the earth
grid energy system. You can set one up on the GL wavelength using a GL
cut tube to eye ball the center of gravity of each rock, from center of
earth grid node. After you get them close, each can be tweaked while
holding the GL tube to match the vibration rate. When all in the circle
are accurate remove the center rock and the field bubble will stay
present with a 2x diameter distance between all the remaining rocks.
This works best with even number of rocks in the circle, like 6 , 8, or
If you do not have accurate spheres like my crystal balls, you can use
a circle of rocks to create a field bubble off the earth grid and even
make it much larger. Center of gravity of each rock must be
This was how ancient people could develop large fields of vibration
without access to anything like quartz or accurately made spheres we
Practice With Distance Tuning
If you want to practice with two crystals, use the quartz wavelengths found here, and a local earth grid node.
Add up as many of the segments as you would like for a longer distance of separation.
I make up a wire to the exact length I want , and then use it to set the distance close to begin with.
See if you can feel the link in between them when you get the distance
correct, as you move them closer and then further through this distance.
Greater mass will produce stronger fields.
GL Fractal - A Deeper Earth Grid
15.1769 inches - The central sun chakra of the human body - resonates up one half way between heart and throat chakras.
Here is a nice photo of one setup
done by Arno, showing Attunement of the GL using platonic
form layout around a center point, while holding a GL tube in the hands.
Thank you Conchita for sharing this photo with us.
Arno's data 2 - 28 - 2015
gl 111 alu 10mm rod in the middle
48.195*pi/2 outside can injected caliper
white sand in the can, 5 cans
After I found this wavelength and was attuned to it, I noticed one day
as if it were coming down from the sky crossing through me at an angle
and then into the earth.
I moved to another location across town and notice the same, only the
position in the sky had moved to the other side of the mountain in
between the two positions.
I then triangulated from both locations to discover the only direction
this energy could be coming from was where they crossed, deep inside
There is major GL node under the mountain we call Arrowhead. [I have
misplaced the data on the depth I calculated.] Suffice to say the node
system is inside the earth as another grid much deeper.
If you are attuned to the vibration you can zero in on a node under the
earth, and the rod used will be at some angle pointing directly at it.
Otherwise you can access this vibration also from any surface node as well,
on the Surface grid system either vertically or horizontally with a
tube, or even using two rocks at correct distance etc....
You could use a circle of rocks to attune someone to this frequency,
and actually place the person on the earth node with the rocks around
them, Shaman style.
This demonstrates how the surface grid can become so useful in
accessing all the grids down deeper, why a Shaman would use those
points to slide down to access any of them, and why we do not want young
children sleeping over these.
If I had not been aware of the geometry, from two location, I would
still probably believe these energies were coming down from the sky.
Using Stainless Steel Bowls
Something you may have already in your kitchen, as opposed to arranging rocks, or cutting tubes.
These SS salad bowls can be set up concentrically, using sand to keep them even on the top edge, bottoms will be separated.
3 - 4 - 2015 Photo by Arno, setup by Ella
They are programmed to vibrate up using two SS calipers simultaneously, and many different resonant fractal frequencies can be injected on them.
Alternately they can be started up using two resonant rods or tubes with a self sustaining ratio between them.
By placing a pi / 2 separation off the desired fractal, they will then vibrate up with a self sustaining field.
To take the field down you simply separate them, and remove them from over the earth node.
They are available from IKEA on line, or www.amazon.com. They have
no lip at the top and are perfect for programming with calipers.
Also see the section on vibrating up concentric SS tubes for more ideas on this:
Experiencing Balanced Intensity
The 36.3 mm Gold Element Light Fractal
This is the ultimate end to experience of the Local field,
and teaches what is necessary to move into the Source field awareness
where balanced operation is the only choice for sanity experience.
Shown in the photo above, a 3/4 inch
diameter Aluminum tube cut to 43.56 cm and adjusted in height
over an earth node to vibrate up the entire garage area.
You can feel it from both doors into the area and all through the garage.
3.63 cm - gold element vibration
Touch it against any quantity of gold, it will vibrate up the gold.
1x 3.63 cm
12x 43.56 cm
24x 87.12 cm
36 x 130.68 cm
This is the element with a 50 / 50 balance between light and dark of the vibration system.
It is the most balanced element yet located, with an intense light of radiance.
Perfect Balance of Yin and Yang
While the energy of vibration from this element is rather intense, it has not ever produced a torsion field headache.
One of the qualities of a perfectly balanced vibration is that it will
begin to brings up memories of the past, and other information through
the mind for access. As if the flood gates on all you experience has
been totally opened.
Gravity Fractal - Torsion Fractals of the core
There are many other fractals to work
with in this opening to feel felt reality, using these same tuning
techniques, and other techniques. I hope that now, with a firm base on how to use them they will be more comprehensible.
The local field can be used for anything from running a car
engine, to shifting a nasty earth node into a wonderful energy of
healing joy and love, to reducing the pain of a cramping muscle in
the back. Let the energy itself guide you to the correct path.
Gravity Fractal on Concentric Tubes
Used for bending light and creating spacial warps.
Mass Vibration Introduction
The Matrix Storage Data
See this document for the RA fractal to increase physical body energy levels.
It can be used in the same ways shown above, also made longer in tubes
by segment addition, or implanted on concentric SS tubes using calipers
to program it onto them, as shown in the Introduction URL just
above this one.
Tools For Crafting Tubes
My measuring tape has both metric centimeters and inches on opposite sides.
Sheet rock razor knife is used to scribe a line on the tube, and feel the vibration when it is held snugly on the correct spot.
Tube cutter is then used to cut on the line.
Right click and then download target, to print this wheel. It may be resized using the paint program in windows.
The wheel shown below, with a 135 mm caliper gap held over it to verify the earth node is centered under it.
My wheel shown above is marked for a true north setting which is 5 degrees off the line of my wall and desk.