Motion
Final release version - contains useful NMR information.
This Document is dedicated to the
study of motion and mastery of producing motion from the atomic layer
and consciousness. The root field force Tempic field, from which
consciousness springs as pure vibration. Light is the purest form of
motion, and in matter all motion is the result of near light velocity
spin.
Knowledge from "The boys up stairs" has continued to be verified, and
designs supplied by Kosol Ouch and the Guardians continue to resurface
as working concepts. What I have come to call the torsion capacitor,
represents both the layers of the Kosol Density travel ship, as well as
the layers of the Joe Cell system. This document begins to show the
connection between High Voltage
pulsing, and Spinning a Mass at High Velocities. Both processes will
raise the density or light speed motional constant. NMR charts are
introduced as well as some of the other c_s_s_p discussion topics, for those unfamiliar with their meanings.
Further insights on Wilbert Smiths spin concepts applied to light speed, particle physics, and singularities.
[This section is a back paddeling effort to reclaim the document after
discoveries were realized, it was moved to the front of the document
after the discoveries.]
Density
There is a reversal of the terminology when shifting between the
conscious and physical layers, and density is one of these reversing
words.
In the spiritual pursuits a higher density is conceived as moving
closer to the God force, matter becomes higher frequency, c raises, and
bodies become ethericly fine, moved by thoughts alone.
In the physical world descriptions of Spin Density
we see the opposite,
and a higher tempic field density is thought of as the location of
slowest c velocity and highest mass center. This reversal of perception
will no doubt lead to much confusion, however in the beginning we were
not aware of the differences, or where the reversing concepts would be
located. Kosols Density ship is intended to move through higher density
from the spiritual perception, not the chemical or physical sense of
the word which will invert the meaning.
In this document the word density will be used from the physical perception,
and gold has a higher density then water or air. The word refers
to heavyness as found in the more dense materials, as well as the
Proton having a higher mass then the Electron.
[At present there is still some doubt as to which way higher density
lies, in the smaller or in the larger realities, but much evidence
points now to the smaller densities.]
Background
Einstein gave us E = MC^2
It is easy to see how raising c will effect the energy present inside
matter by a squared function. Tesla gave us a concept for faster then
light motion with his pancake coil / ball transmission system and
recording a wave that travels at 1.5 c. Suffice to point out that in
the search for alternate energy sources, any system that will alter the
velocity of light will effect all energy systems within the effected
area. Wilbert Smith gave us a perception for treating the tempic field
as a variable force field with a relative linear distance function.
This leads directly to a concept for altering time flow rates and the c
velocity that we think of today as a constant. Conscious acceleration is experienced
as lightspeed rises and physical density is lowered. As we see with black holes, the time flow rate slows
in a stronger gravity field. In a neutron star where the Electron
shells "reverse spin" is removed, gravity jumps also. It is where dual
opposing spin fields at the atomic level are present gravity is lowered
and time flow rate is accelerated.
Affecting the physical world
As to motion and the physical world we must discern what alterations
can effect light speed and which ones cannot, then progress accordingly.
Moving physical objects linearly, is shown to have very little effect
on altering c, as a motion of even the earths rotational velocity is
very slow compared to light speed.
If we are to effect light speeds, it will be happening at the atomic
level where all particles are already spinning at near this velocity.
Bringing two magnets together displays B field force. But pushing the
Proton layer of the atom towards the Electron shell, lowering the
distance between them on one side is seen to bring two oppositely
spinning c velocity vectors closer together. This opposing dual spin
system is the very location point for the zero point center of all EM
interactions. It can be accomplished with physical rotation
[centrifugal force] or with voltage gradient in all the AG
materials. The list is now longer to include the components of water.
AG materials [diamagnetic]
Bismuth
Copper
Aluminum
Hydrogen
Magnetic materials [magnetic]
Iron
Cobalt
Nickel
Oxygen
Precession and Pulsing
[The presence of a Magnetic field
- aligns spin in the AG metals [Bismuth, Copper, Aluminum, Hydrogen]]
Electron and Proton particle, spin opposite directions in the same
magnetic field. Orbital and particle spin are aligned so they follow
the precession motions.If we tilt the orbital then the particle also tilts. While Electron has dual spin Proton does not and
will
flip between two alignments. Orbital or particle aiding
alignment. Precession is the result of a torque
already identified in modern physics. The two spin fields move into
oppositely precessing
motions where angular interaction is being altered for the spin fields
from
each of the other. Maximum light speed effect is present when
there is no precession, raising
light speed. As precession starts, opposing tempic vectors start to
angularly skew from one another and c drops as precession motions
accelerate. Energy moves directly from c into precession momentum.
Precession
Torque
[It was discovered that the precession of atomic Proton and Electron
shells is a "powered process", that is the precession motions for the
atomic particle shells is the result of a torque. The torque originates
with the inetrial momentum of the spin forces. These are what we term
non entrophy forces, they do not run down.]
In the case where two field forces precess inside one another opposite
directions, if we tilt one spin to 90 degrees we see now the spin
directions begin to roll along one another at two opposite corners with
an aiding tempic field of motion, and they oppose on the other two
corners. Tempic field density now becomes higher along one 45 degree
angle and lower along the other. More importantly, electron and proton
are spin field decoupled to a great extent and Electron will accelerate
while Proton decellerates, both due to internal spin configuration. The
atom will radiate a high density field at 90 degrees to a low density
field.
Viewing this from the top we get a sense of the tempic coupling during
a tilt. As reversed spin passes the center line the tempic fields fall
into
alignment and begin to lower c. In the AG materials this couples particle inertial momentum,
and alters the torque that creates precession. Magnetic field always pulls the
Electron and Proton shells back into alignment, and tempic field always
pushes them out. Stronger
magnetic field will narrow the precession cones and raise precession
frequency. [NMR]
Propagation of Torsion
[Breaking opposing dual spin alignment lowers c velocity in Proton]
From the spinning cylinder experiments we see how torsion
propagates from Electron to Proton, coupling its way along and moving
through a magnetic field. Spin is coupled along the B field but it
operates at 90 degrees to this as shown in the arrows above. As the
particles have actually two conical ends that spin the same direction
only one circle is shown for each particle. Within this system of
propagation we can identify the dual spin of the earlier models. The
most obvious thing that sticks out here is that the Protons torsion
component is much larger then the Electrons, while the Electrons
magnetic field is much larger. Protons torsion operates "through"
Electrons magnetic field.
Here we see what may happen if the Electron is quickly hit with an
EM field in copper wire. The E field spin tilts first at very high
velocity capable of a rotation in the Ghz range. Any pulse that is
faster then the NMR rate will separate the
two fields for an equalization time as long as one second. A sharper pulse will separate them more fully. Torsion
propagation collapses and density increases lowering c at the nucleus. Dual
opposing spin
disappears at this angle between the particles. Electron accelerates and looses mass,
and nuclear mass increases, slowing. Nuclear mass has lost its counter
rotating electron influence, and Electrons dual spin can now cancel
more fully.
Spin Relativity
Examining spin
closely, what happens when a spinning wheel is moved along its spin plane, like
the wheel of a car down the street. We find one side of the wheel of the car
matches the stationary position of the earth as it touches and the opposite side
accelerates to 2x the velocity of the car, where the axle moves to 1X of the
cars velocity. Now from inside the car we observe the wheel and both top and
bottom appear to be in motion the same velocity [our frame of reference has
moved to the axle now]. Observing from the road we see the bottom of the wheel
is stationary and the top spinning faster then the axle.
To have motion induced one side of the wheel
must have a higher motion velocity vector then the opposite side, and this is
the nature of motion with respect to spin. All observers will still agree
on what is one revolution, if a white dot is placed on the tire. However all observers
will not agree on the velocities that appear along the wheel at the top and bottom of spin.
Consider an atomic particle moving through space with an inertial momentum of spin. Its sides are rotating at near lightspeed.
The act of
atomic particle spin moving through space warps the wheels sides and
creates a Torsion field. Light velocity spin is covering less distance
on one side of the spin, then it covers on the opposite side. What
would Einstein say about this? An electron in orbit has a velocity of
.999999....5 times light speed. But if viewed from outside moving at
1/2 light speed, one side of the wheel must be moving at 1 1/2 x light
speed and the other at 1/2 light speed in the opposite direction. This
skewing with respect to c creates a torsion field. Einstein would say
space is warped on opposite sides of spin. If one is riding with the
particle however the field is not observable and the torsion field is
not present but appears as a smooth spin field with no warping.
If one is looking from outside they perceive a torsion field warping
every atomic particle.
When any piece of matter is set into motion properties of the
matter is altered relative to its internal light speed spin, and time scales
start to become altered between what is in motion and what is not.
From outside we perceive an uneven velocity on
both sides of the light speed spin field that is in motion. However light speed
is perceived as a constant, so what we see is an elongation or contraction of
the matter [axle view]. From the particles perception we perceive the world
begin to move. No matter what force set the particle into motion, the light
velocities will warp on both sides of spin oppositely, and with dual spin they
will warp on top of one another opposite directions creating a torsion sheer on
both sides of the particles motion vector. Because the interaction is dealing
with c rather then a standard linear function, the tempic field is altered. A
new relativity model may be derived from this spin model and may add to Einsteins relativity model. Spin
relativity.
Earth Relativity
Dell reports on Wilbert Smith research,
"Inside a spin field everything is relative as Smith
points out. But since we are always inside some kind of spin field
(planet,
solar system, galaxy) there is always a clock that is the correct clock to use -
On the planet it is earth rotation, in the solar system it is the sun,
going
to Alpha Proxima it is the galaxy. By having an absolute framework (if you pick
the right one) we always avoid the Einstein paradox.
If you are seeing
differences in spin direction from different positions then you don't have the
right clock and need to move out one spin frame (at least)."
When
designing any torsion device, earth spin must be considered. Generating a field
that predominantly adds CW or CCW mass spin to the nuclear area of the atom, one
direction will add to the earths spin field and the other will first subtract
from it, before increasing again in the opposite direction. If we are to
navigate the earth, all will be relative to this gradient. If we are to navigate
the galaxy then another spin gradient will become our base. Turning the system
upside down will reverse the dominant spin, and moving between hemispheres will
turn it upside down with respect to earth. The space program always shoots
rockets off towards the east so that far less energy is required to reach orbit.
The same is true for the Joe Cell, and to get the same power from a spin effect,
turning the correct direction is essential to using the earths energy to help
power the device. If your Joe Cell is reversing the earths natural spin
direction then it will have to work much harder to get the same results.
Utron model:
[Drag causing motion]
If we examine Wilbert Smiths basic concept of "spin" or "light speed spin".
We come to see all matter as dual oppositely spinning masses powered by
light, the balance point being the Zero point for this density when
motionless in space. Now we examine Otis Carrs Utron model.
Applying drag to spining copper cones creates
motion, and the harder we try to stop the spining cones the faster
they shoots off into motion. As a pure tempic field the motion
is along the spin plane.
Dual spin results in linear motion if drag
is added to opposite sides of the
dual spin fields, and the two spin fields are coupled along one axle.
[Physical spin raises c].
We see from the above diagrams that if we tried to stop both spins from the
outer sides, the result would be the inner spin would accelerate and the system
would move into motion of the inner arrows.
With two oppositely spinning
masses of Copper, a diamagnetic material, placing a dragging magnetic pulse on
opposite sides of each causes the spin to induce motion from both sides equally.
As the spinning cones are hit by the magnetic field, it is accelerated away from
both spinning cones the same direction.
This is one model for motion from a
tempic field. It is
motion produced from adding drag at the
correct places of dual spin.
In the Utron, we see two spinning masses being pulsed on
opposite sides at 45 degrees.What is not obvious is why this would
propel the system faster then the motors are spinning the cones.The
Coppers Protons shell will be locked into the physical spin field and pushed outwards by centrifugal forces,shoved
into the electron shells that bond the cylinder together. Two
light speed velocities moving opposite directions are now reduced in
distance.When the magnetic pulse hits the cones at high velocity the
electrons magnetic field will tilt to 45 degrees and one magnetic pole
of the atom will
turn into the side of the atom being compressed, and the other will
turn into the side being expanded. The nuclear spin will not turn as
fast, and it will be now setting in opposition in each cone while the
electron spin effect has been removed. Proton spin will meet proton
spin from each cone directly with far less electron involvement.
Protons will be cancelling thier tempic field density, while Electrons
are also free to cancel thier own tempic field density.
Bismuth Torsion Capacitor
Voltage Gradient - Tempic field distortion in the AG metals
[The presence of an Electric field - raises c on both magnetic poles of spin
equally - Electric field effects both Proton and Electron equally in
opposite directions]
In the Bismuth Torsion capacitor, placing a layer of bismuth insulated
on one side between two layers of Copper we see and feel a tempic field
interaction when charging the plates.
Proton shell is pulled towards the negative plate and Electron shell is
pulled towards the positive plate. The Bismuth atom undergoes a light
velocity alteration on each side of its orbital spin circles similar to
the one above with motion. The area to the right, the opposing tempic field lines counter
and accelerate c, while on the left side they move away and lower c. There are also precession angles to consider but over
all it would appear that the atom would tend to move upwards in c velocity if this effect was a strong enough one. The torsional
distortion from light speed moving slower on the left and faster on the
right is the same sort of distortion we see with atoms in motion
through space approaching light speed velocities. As tempic field density lowers, light velocity increases and the effective
distance light covers becomes larger. The atom increases size. If the voltage is quickly dropped from a fast discharge, then a physical vacuum may result.
If a magnetic field is present and used to align the Protons spin plane
such that one pole moves into the compression side and the other pole
moves into the low density side, then we end up with an atom having one
magnetic pole in a higher density then the other. The precession cones
of the magnetic field are now distorted and one side takes on more
energy. If pushed far enough we may see a monopole field appear to
emerge.
Tempic field interacting inside circles are a function of perimeter
distance sums, as they are a linear distance force. When centered exactly perfectly the atom will be at
total sum lowest density. This is because any movement off center
decreases the top and bottom distance sums. While the sum of distances
on each side remains constant, the top and bottom sum becomes lower,
and so there is more overall tempic interaction
introduced between the Electron and
Proton shells by one another. Tempic fields acting to oppose one
another accelerate the light speed velocity, and all atomic spin is
at near light speeds.
The AG metals can produce this effect, but then they will radiate to
any matter around them directly nucleus to nucleus once they become a
torsion field.
In the Bismuth capacitor once the higher torsion is
generated it seems to permeate in all directions equally. In the Joe
Cell systems engine
water is where we expect to see the highest effect generated as its
hydrogen atom will be subject to this effect when the plugs fire. If
the charge is building on the plug at the top of the cylinder, as it arcs, a higher density gradient may form at the top of the
cylinder creating a torsion vacuum.
Field forces and atomic interactions
1 -The presence of a Magnetic field
- aligns nuclear spin in the AG metals [Bismuth, Copper, Aluminum, Hydrogen]
2
- The presence of an Electric field - raises c on both magnetic poles of nuclear spin
equally - Electric field effects both Proton and Electron equally in
opposite directions.
3 - The presence of high velocity spin - raises density on both
sides of spin equally - Protons are pushed outwards as Electron bonds
hold the matter together and pull back against them.
4 - Magnetic field effects Electron shell strongly
[Oxygen and Iron] and Proton shell weakly [AG metals].
5 - Torsion
field effects Proton shell strongly and Electron shell weakly
6 - A magnetic field in line with an electric field will raise c and make one magnetic pole become dominant [Joe Cell]
7 - A spinning mass [raising density from centrifugal force], at 45
degrees to a pulsing magnetic field will pull one magnetic pole into
higher c velocity to become dominant [Utron]
Joe Cell
Initial charge
This diagram illustrates the voltage scalars present on one Joe Cell water layer, as
a circular charged system. This is the same result we would see if the circle was set into a spinning motion,
nuclear mass at the proton layer would be propelled outwards pushing it
into the electron shells that hold the bonds of the device together.
The E field is acting like device spin would. You can see with a
Northern Hemisphere
charge on it, the Hydrogen atoms nucleus receives an outwards push
evenly all the way around the cell. Now if the magnetic field
turns outwards one pole along the outer ring and one pole towards the
inner ring, one side of the magnetic field gets a higher torsion state
then the other inside all the Hydrogen atoms, as they will align with a
magnetic field. The one being pushed into the electron shell moves
higher in spin
and the other moves lower. The dominant magnetic pole facing
outwards around the
tubes.
Water molecule chains
The molecule chains of water will break open in the Joe cell and attach
one side to each wall of the tubes, lining up perpendicular to the
tubes and forming chains across the tubes gaps. The ends touching the
tubes will be free to vibrate into circular motions, as the charge
along the tube is even, not so with the other water molecules that will
attach end to end. The nuclear spin motion starting along the water to SS
surface will now propagate along the molecule chain and start to
move the Oxygen atoms into a circle setting up a magnetic field in line
with the voltage gradient. The nucleus of the Hydrogen atoms will be
pulled one pole into the electron shell and one pole free of it. This
will imbalance the magnetic field. Since all the molecule chains are
the same length, the torsion motions will become coherent like a whole
bunch of little clocks next to one another the size of one molecule. It
is the distance between the tubes that will determine the properties
of this molecule chain, mainly length and voltage across it.
Piston Torsion line
Our Joe Cell research has shown us that the pistons of an internal combustion
engine generate a longitudinal wave front that leaves the engine in the same
direction as the pistons motion vector.
This field can be sensed as a torsion field and it represents Tesla's
longitudinal wave which is also produced by rapid pulsing of EM fields.
It is most likely the result of the E field pulses happening inside the
combustion chamber, as physical motion is not fast enough to warp light
speed motions, however we see from the above that E field pulsing will
if it hits a diamagnetic substance like water or Aluminum. And motion
will also do this at the point of reversal, but in sine wave motions,
like the pistons use, the reversal is gentle. The action on the atoms
however is the same, both the reversing motion of the pistons and the
electric field will push the atoms into the same unbalanced state with
atoms mass [nuclear mass] being shoved strongly into the electron shell
on only one side.
Cell models
Several models are suggest at this point of Joe Cell experiment, and need to be fully explored.
Lazar Beam Model:
Similar to a coherent light beam, or Lazar, if all the Hydrogen
atoms in the entire Joe cell at all layers begin to spin along one spin
plane, as well move at one common frequency, then they will begin to
form a coherent torsion field who's power level will grow
expotientially. This is done one atom at a time. As the water
molecules each begin to align with the charging voltage they will line
up slowly such that all the voltage charges begin to stack like little
batteries. If they all remain locked into this orientation then the
cell will output a natural voltage after charging is complete. Now the
goal is to get all the cells layers producing torsion at the same
frequency. The outer layers will have a higher mass so will be
stronger, but the frequency must match. This is a function of the
distance between the tubes and the voltage applied. Tunning resisters
have been suggested to balance layers of the cell with uneven distances, and smaller water
thickness will need its voltage reduced to match frequency. This is
done by placing resisters across it until resonance is felt and all
torsion sheer lines disappear. [This is questionable at present] If
this method is correct then all the torsion sheers should vanish to a
smooth gradient.
In this model all the water receives the same spin charge
field and becomes charged equally.
The root concepts here are "coherent tempic field", and "coherent light" which have been identified as
the same concept through tempic field theory.
Rising c Velocity Model:
In this model the c velocity of the cell rises towards the center, and
it may be expected that lower spacing between tubes would create
multiple torsion sheer layers towards the center of the cell, where the
highest c velocity would appear. This is based on some function applied
to alter the density by steps. The result is that the water in the cell
would now receive multiple layers of spin charge. They would not become
coherent but each push off the next lower one to reach a higher state
at the center, much like a tornado with tighter spin towards the
center. Torsion sheers will form outside the cell where the multiple
fields interact and move along one another at different spin rates.
Reverse patterns of spin will form between the layers moving at
different speeds setting up platonic forms.
While it was discovered that reducing the cell spacing by half may
cause a reverse voltage to appear in the cell, indicating a reversed spin field
forming between coherent layers, if this was done more gradually it may work and
hold its charge. The cell would have a higher spin field charge at the center
layer, and a lower one along the outside. The reverse of this model is also
possible where the outer layer becomes a higher frequency, and due to the
increased mass of water present on the outer layers, smaller spacing at this end
would be more effective.
Platonic Vibrations of Concentric Tubes:
The spherical harmonics of the pipe diameter should be present in every tube at different frequencies, based
on tube diameters. This is a vibrational field moving around the tubes
as filled with water, and as the vibrations reach a certain frequency
we get a resonance in one of the layers of the Joe Cell. If all the
layers can be vibrated together we may see something happen. Once again
either separate power supplies to each tube for experiment, or a series
of potentiometers to slowly adjust the balance until all layers of the
cell are in a state of resonant vibrations. One can energize one layer
at a time and record its resonant peak voltages, then build a resister
network from there.
It was observed early on that altering the voltage across the Joe cell
produced several resonant peaks, it is possible we were hitting one
layers resonant peaks at a time, and over the spread we see all of
them. It was also observed that these resonant peaks are not present in
the bismuth torsion capacitor indicating it is probably coming from the
tubes circular shape. [Ongoing experiment is in progress to more
accurately describe a usable model for workable designs].
Experiment has verified that vibrational patterns of a platonic form
only manifest if the cells have different spacing, and the patterns
forming outside the cells are stationary interference patterns.
This indicates two different torsion fields interacting off one
another. In any cell with only one layer of water energized there are
no platonic vibrations that I could find anywhere, and torsion rises
smoothly with voltage gradient.
The Roll of NMR charting in Alternate Energy Work
"The roots of motion lie within the atom, and at the nucleus is the
heart of the major mass which is in a state of torsional light velocity
spin.
I am amazed at the current desire to define all EM interactions without
going any deeper then the electron shell. In truth very few of the
elements respond to EM usefully at the electron shell and most are
magnetically neutral. It is the nuclear shell that more often responds
to EM uniquely and alters the atoms strongest field force, that of
spin, or tempic field." Dave L
Background
An NMR Calculator
NMR data
"Use the above link on line. Go to the top where the chart can be
programmed for magnetic field strength. Plug in the value for hydrogen
at 1 Tesla which is 42.58 Mhz/Tesla. In the box marked 1H
frequency enter "42.58" hit enter. Now go down the chart and you can
read the frequency for any isotope of any element setting under a neo
magnet as we use in the RainMaker. This will give a close approximation
for tunning the function generator. As neos range from 1 T to about 1.5
T it will be close enough to show you what function generator you will
need to get to hit NMR rates. In any one device with magnets you will
find resonant layers moving away from the magnets that drop frequency,
but many peaks will be sensed as you tune through the band. They are
sensed in the mind just as scalar coils can be." Dave L
A chart with highlights
NMR Table
When deciding on elements on the chart, two things are very important. Abundance and magnetic moment. Look at Bismuth for the clues 100 percent abundance means
that every single atom of Bismuth is consistently useful. Same with
Aluminum. Look at copper and you see it is split into two isotopes, each having
slightly different frequency but both adding to almost 100 percent useful
atoms. Look at iron, only 2 percent abundance, very few atoms of iron will respond
to EM interactions at the nucleus. Iron will be very hard to align the spin to
achieve a coherent field of any sort using magnets. While iron will still follow
a density gradient, it will not generate one of itself. Iron is useful on the
electron shell where it is magnetic.
Abundance
Abundance is the percent of all the elements atoms that have the
isotope on the chart. Some elements only have 10 percent
abundance that will respond to NMR. We assume the rest are also present with
other isotope configurations because in nature they usually always are. If they
scan an MRI and find a certain quantity of magnesium, they must increase the
reading to reflect the other 90 percent that will be invisible to the MRI
scanner.They will not be detected because their isotopes are different.
Abundance is a best guess and comes out accurate enough for internal pictures
to reflect what is actually there, and not merely what is detectable. There are
a multitude of isotopes that are not on the chart, these others are not on the
chart because they do not respond magnetically. We cannot align them using EM,
we cannot flip them over to a high energy state, and they will not produce
photon releases we can detect. 90 percent of all magnesium atoms cannot be
manipulated using EM but they will be found to be present if the sample came
from the earth naturally. These counts of atoms are extremely high. If they did
not add in the calculation for abundance then a sphere of magnesium inside your
body would appear on the scan as 1/10 the size you would find during the
operation. Abundance is on the chart for a very good reason. Bismuth is 100
percent abundance, this does not mean it is the most abundant element on the
earth, I believe that Aluminum is. It means that if you go out and mine Bismuth
or Aluminum, every atom in its mass will respond to EM manipulations, and
absolutely none of its nuclear isotopes will be hiding from it. All will produce
the same photon frequency in the same conditions.
Nuclear Magnetic Moment
Magnetic moment will determine which direction non canceling spin
will be turning, in a magnetic field. While these magnetic fields are
very small and do not do much outside the atom, the spin attached to
them is the strongest of the atom, and nearly all the mass of the atom
is located here at the nucleus. Nuclear magnetic moment gives us the
overall direction that the nucleus will spin in an external
magnetic field. You find positive and negative numbers in this column.
Examining water we see O and H have opposing spin fields, and O is not very
useful as its abundance is very low. Adding Chromium to the mix raises the
abundance to 9.5 percent with a like spin as Oxygen. Chromium from the Stainless Steel will dissolve in
water and is not dropped out by the voltage on the Joe Cell. This places a mass
inside the water that has opposing spin to the dominant hydrogen spin field. It
will align if a magnetic field is present. Hydrogen is almost 100 percent
abundance and will dominate the system. Hydrogen is the reference element for all
NMR work because it is most identifiable in MRI scanners and easy to spot.
This chart and interpreting spin fields gives a new light to all the
magnetricity devices using other metal compositions to create rotating motors
and devices with magnets. Since these fields are torsion and tempic by nature,
it is the nuclear spin fields that will determine how the systems operate inside the
magnetic fields present.
While this chart is used for precise manipulation and detection in very
strong magnetic fields that are very consistent using super cooled magnets, we can still use the information to
determine spin direction as well as general frequency for setting pulsing
systems that manipulate torsion. A pulsing system however alters magnetic field and sweeps a band of
useful frequency photons. For atoms to absorb energy, a changing magnetic field
will spread the frequency out that can be absorbed by the materials.
Useful interpretations of NMR data
We can use the NMR charts to locate the dream elements like Bismuth,
and also to determine which direction its torsional spin will be
turning if an EM field is present. This is very necessary to know when
setting up a nuclear torsion powering system on the earth. In past
times we have always "dissected" things to study them. With atoms this
does not work. Smashing them and blowing them apart will not teach us
how to pull out nuclear energy without destruction of the atoms
themselves. The necessary concept to be grasped here is that nuclear spin is a force of nature
as the atom stands, in its complete wholeness, and the atom will always
pull back to c velocity spin no matter how we use it.
This comes with an understanding of the tempic field, torsion, or spin
fields. Blowing the atoms apart we observe a very many short lived
energy spin pieces that then disappear, and we label them sub
particles, yet maybe all we have really done was create them in the
destruction of the stable particles.
Nuclear spin - a deeper look at the past knowledge -
Andrew reports some current research,
The Baker patent references the Wallace patents. It also contains Wallace's
"little known heat pump patent" that Ron Akita referenced in that
correspondence I had with him. The heat pump patent, utilizing nucleon
spin polarization, is Wallace, US3823570
From the summary:
In
the past century great strides have been made in harnessing the three degrees
of translational movement of electrons in the electromagnetic regime. Very
little, if anything, has been done to utilize the inertial regime comprising
the relatively massive nucleons, and particularly the three degrees of
rotational freedom thereof one of which is preempted by nuclear
spin.
In my U.S. Pat. No. 3,626,606, I demonstrated how, by applying
a rotational force to material whose nuclear spin number (I)
is half-integral, a reorientation can be achieved in the
nuclear structure. In my U.S. Pat. 3,626,605, I demonstrated how a
time variant may be imposed on the output resulting from such reorientation.
It immediately becomes evident that there are potentially
many, many uses of these reoriented nucleons. In all probability, techniques
will be found which to some extent parallel those employed for
utilization of the electron in the electromagnetic field, and it becomes
clear that the thus reoriented nuclear structure may lend itself to
such uses as modification of the gravitational field acting on a body so
as to alter its gravitational attraction toward another body,
separation of isotopes by distinguishing between nuclei according to
their nucleon content, generating of gravity waves for communication
and other energy transfer, stabilizing of plasma and maintenance of
plasma density for controlled nuclear fusion, possible harnessing of
cosmic gravitational energy in addition to utilization in many, many
other fields."
Dave, Wallace adds this to your NMR discussion and
list:
"The Spin Values (I) for the isotopic forms of the elements are
well known and may be found in tabular form, for example, "The NMR
Table,
Fifth Edition," published by Varian Associates of Palo Alto,
Cal. Typical among substances in elemental form having such half
integral
spin values are beryllium with a neutron spin of I = 3/2,
aluminum with a proton spin of I = 5/2, chlorine of which both isotopes
provide
proton spins of I = 3/2, vanadium (useful for alloys) of which
one isotope of 99.76 percent abundance provides a proton spin of I =
7/2,
cobalt with a proton spin of I = 7/2, copper of which both
isotopes provide spins of I = 3/2, and bromine of which both isotopes
provide
proton spins of I = 3/2. These chemical elements and others of
half integral spin values may be alloyed together as well as to
chemical
elements possessing no-spin and integral spin nuclei provided
quantity percentages of such additional elements are small."
Conclusions
Wallace had already studied this NMR table over 50 years ago and
determined its use in nuclear energy as a mass spin field effect. He spun up these elements to very
high RPM and studied the field force interactions, even hitting on
gravity. He directly relates this to the nuclear spin, and inertial momentum of the nucleus of the atoms.
What we need to realize from all this is that all the elements on
the NMR charts are torsion field generating materials if EM is present,
and all will contribute to a torsion field in some way if present at
the point of generation of the fields. Some will add positive spin and
some will add reverse spin, and we can look at the charts to determine
this when designing a system.
References:
Preparation for the study of motion
Vocabulary:
Density - Layers
of the universe where light speed appears to be relatively constant,
therefore pushing density is altering light speed [Also see description
above in the text.]
In chemistry, the density of a mass indicates its weight compared to an equal volume of water.
In
Spirituality higher density is moving towards the God force [Source]
c - abbreviation
for light speed, thought to be a constant in modern physics, but
offered as a variable in the works of Wilbert Smith
Torsion - as dual opposing light velocity spin is thrown into an
off centered state, torsion fields are sensed from the physical side -
as heavy wheels are put into rotational motion centrifugal forces
create torsion by hurling the nuclear level outwards into the electron
layer. Torsion is referenced from the physical side and tempic field
from the c velocity side.
Tempic field - represents
light velocity relative motion and all atoms particles have inertial
momentum vectors relative to c that drops towards the center of spin geometrically. The field drops off linearly in space -
opposing vectors raise c and parallel vectors lower c on the physical
side, this works opposite on the conscious side
B field - In electronics the
magnetic field is given the letter B, this is also referred to as the M
or magnetic field in many of our local references and is one of the T E
M group of field forces.
T E M - The field forces defined by Wilbert Smith, Tempic, Electric, Magnetic
References
NMR calculator - Alexej Jerschow, New York
University
Georgia State University On line Hyper physics
Electron Spin
Contributing Authors
David Lowrance
Dell
Coleman
Andrew Bellon
c_s_s_p group
Home Back to Theory